Dishwasher & Washing Machine Installation in St. Louis

Appliance Installation in St. Louis — Dishwashers, Washing Machines & Ice Maker Lines

The plumbing connections that make appliances work — installed correctly the first time, with no minimum job size.

Appliance Installation Services in St. Louis

FIX St. Louis installs dishwashers, washing machines, and refrigerator ice maker water lines in St. Louis homes. Dishwasher installation includes removal of the old unit, supply line and drain connection, and electrical hookup. Washing machine installation connects to existing supply and drain connections and levels the unit. Ice maker lines run a 1/4-inch water supply line from the nearest shutoff to the refrigerator. No minimum job size. Firm quote before any work. Phones answered 24/7.

314-434-4100

Call Now

Phones Answered 24/7

314-254-8006

Text Now

Online Form

Free Quote

Appliance Installation Services FIX St. Louis Handles

Service	What We Do
Install dishwashers	Disconnect and remove old dishwasher; install new unit; connect drain, supply line, and power; test.
Install washing machines	Connect new washing machine to existing supply lines and drain; level and test.
Install water lines for refrigerator ice makers	Run 1/4” water supply line from shutoff to refrigerator; connect to ice maker inlet; test.

Appliance Plumbing Connections in St. Louis Homes

Dishwasher Installation

Dishwasher installation involves three connections: the hot water supply line, the drain hose connection to the kitchen sink drain or garbage disposal, and the electrical connection. All three must be correct for the dishwasher to function safely and without leaks.

The most common dishwasher installation mistakes are an improperly routed drain hose (which needs a high loop or air gap to prevent backflow from the sink into the dishwasher), a water supply connection that is not fully tightened (a slow drip under the unit that gets discovered weeks later), and a dishwasher that is not properly secured to the underside of the countertop (which allows the unit to shift during use).

We remove the old dishwasher and dispose of it, connect all three lines correctly, test for leaks at the supply and drain connections, run a test cycle before leaving, and verify the door closes and latches correctly.

Dr. Steve’s Take:

A new dishwasher is a kitchen upgrade that homeowners frequently delay because the installation seems intimidating. Dr. Steve included appliance upgrades in a column on small improvements that transform daily life — a functional, efficient dishwasher is one of the kitchen appliances that makes the biggest difference in how a kitchen works day to day. The connection work is straightforward for FIX; the result is immediate.

From Dr. Steve’s Tips: Have Yourself a No-Excuses-Necessary Christmas

Washing Machine Installation

Washing machine installation is simpler than dishwasher installation if the laundry room has existing hot and cold supply connections and a drain standpipe. We connect the hot and cold supply hoses to the machine and wall valves, insert the drain hose into the standpipe with correct positioning to prevent siphoning, level the machine on all four feet to prevent vibration during spin cycles, and verify the door (front-load) or lid (top-load) operates correctly.

If the laundry area does not have a drain standpipe — common in some older St. Louis homes where a utility sink has been used as the drain point — we assess the existing setup and advise on the correct connection method.

Dr. Steve’s Pro Tip:

Replace washing machine supply hoses every 5 to 7 years regardless of whether they show any visible deterioration. Washing machine hose failures are one of the leading causes of household water damage in St. Louis. The failure is usually sudden — the hose bursts at the braided reinforcing layer and delivers full water pressure into the laundry room continuously until someone discovers it. Braided stainless steel supply hoses are more durable than rubber hoses and are the correct choice for any new installation.

Refrigerator Ice Maker Water Line Installation

An ice maker water line connects the refrigerator’s ice maker inlet to the nearest cold water supply — typically under the kitchen sink or, in an adjacent wall, tapped from the nearest accessible water line. The line is a 1/4-inch copper or braided stainless supply tube running from a saddle valve or compression fitting on the supply pipe to the refrigerator inlet.

We run the line, make the supply connection, connect to the refrigerator, and verify that the ice maker cycles correctly before leaving. If the refrigerator is being moved to a new location, we assess whether the existing line can be extended or whether a new connection point is needed.

Dr. Steve’s Take:

Dr. Steve covered water efficiency in a column on eco-friendly repairs, and ice maker connections are relevant: a refrigerator ice maker that has been running with a slow leak at the water line connection is wasting water invisibly behind the refrigerator. If your refrigerator has been in its current location for more than five years without the supply line being inspected, pulling it out and checking the connection takes five minutes and can prevent a significant water damage event.

From Dr. Steve’s Tips: Eco-Friendly Repairs: Tiny Fixes to Reduce a Home’s Carbon Footprint

314-434-4100

Call Now

Phones Answered 24/7

314-254-8006

Text Now

Online Form

Free Quote

FAQs

Appliance Installation in St. Louis

Do you install dishwashers if I purchase the new unit myself?

Yes. You purchase the dishwasher; we handle the removal of the old unit, all the connections (water supply, drain, electrical), and the test cycle. The only requirement is that the new dishwasher is a standard 24-inch width that fits the existing cutout. If the new unit is a different size, we assess what cabinet modification would be needed before quoting.

My washing machine is installed but vibrates badly during the spin cycle. Is this an installation problem?

Excessive vibration during spin is almost always a leveling issue. Washing machines have adjustable feet that must be set so all four contact the floor evenly. If any foot is off the floor, the machine rocks under the off-balanced load of a spin cycle. We adjust and lock the feet and test with a spin cycle before leaving.

My refrigerator doesn’t have an ice maker line. Can you add one?

Yes. We install a 1/4-inch water supply line from the nearest accessible cold water connection to the refrigerator inlet. The specific routing depends on the refrigerator’s position relative to the nearest supply line and any cabinet or wall obstructions. We assess the routing before quoting

How long does dishwasher installation take?

Most dishwasher installations are completed in one to two hours, including removal of the old unit. If complications arise — a stripped fitting at the supply connection, a drain line configuration that needs modification — we advise before proceeding.

What St. Louis neighborhoods do you serve for appliance installation?

We serve homeowners throughout the St. Louis metro. Contact us to confirm service in your neighborhood.

New Dishwasher? New Washer? Ice Maker Line? Let’s Connect It.

FIX St. Louis handles appliance plumbing connections throughout St. Louis. Installed correctly the first time, with no minimum job size. Firm quote before we touch anything. Phones answered around the clock.

Contact FIX St. Louis — Appliance Installation

Call 314-434-4100 — Phones answered 24 hours a day, 7 days a week

Text 314-254-8006 — Text us anytime with questions or to schedule

FIX St. Louis • 50 River Bend Dr, St. Louis, MO 63017

CustomerService@FixSL.com

Submit a request online and we’ll follow up promptly